Quote: Originally Posted by Jon Zapf
After I installed the unit I had a problem with HOM mode. Long story short it was self inflicted.
The C14 terminal wire wasn't pushed far enough into the hole. No contact = no voltage = no voltage = no HOM.
Make sure your terminals are even with the other contacts in the plug!!! It says that in the instructions but of coarse I didn't pay attention. I had to make the holes in the back of the plug a little bigger with a 1/16 drill bit. I just took the corners off the 3/32nd hole you drill then pushed the terminals in with the back of the 1/16 drill bit.
Phrozen is a hell of a guy he talked me thru everything I had to do to problem solve the unit! He went abouve and beyound the call of duty on this one. Thank you, Thank you, Thank you!!!!
Everything works like it should and I can't wait for dry roads for a real test.
Glad to hear you found the problem. I was about to give up and have you send it back. :-)
Enjoy the Toybox and thanks for helping to spread the word with your review!
