Hey guys,well after waiting quite sometime (about a month,which is the normal wait time) my BEAUTIFUL Intimidator Manifold shows up via the Mailman.Oh if that mailman only knew what he was carrying...lol.Anyways,the manifold is going on Tuesday along with a Forward Motion Reflashed PCM(B & G ) and a FBM Race Ported Intake Manifold.MUAHAHAHAHA!!!
My mods are in my sig,306WHP is what I put down on pump.With the I-Mani,FM PCM,FBM Intake Mani and a 50/50 mix of 93/110 octane im aiming for 350WHP with my E1 turbo.Hopefully this Manifold will do the trick to taking me to the 350WHP mark I would like to hit.Here are a few pics I snapped...
In this picture you can see where John cut the stock elbow,and welded in the new elbow that baby jesus also used on his exhaust manifold..
Very nice Ceramic Coating,this isnt the cheap stuff guys...this is very high quality.Pictures cannot show how good this coating really is,you HAVE to see it in person!!
Heres where John did alot of portwork to the Exhaust side of the mani,for those of you who are a little confused right now...this is where the 02 Housing bolts up (HA newbz...).
Runners....not sure exactly how much material was removed here but hey it looks good!
Like I said earlier in the post,install day is Tuesday and Wednesday next week so I will keep everyone updated,especially John at PTP once I get it installed and tuned.Lets hear some responses here!!
