Quote: Originally Posted by OPM2
I had the same problem, I made my own relay harness last winter. I tried multiple ways to make everything work like stock, the only solution I found was to trigger the hid's on with the high beams, it takes the factory DRL relay/controller out of the equation. It won't work unless you plug in a stock bulb as a dummy, i snapped off the high beam pin so the bulb wouldn't turn on.
It's like the dummy bulb acts as a resistor or something. It wouldn't work on low beams though. this should work for anyone using a single low beam retro.
info for building harness from hid planet.
hey that sounds like a good idea. to bad in this case i have bi-xenon's, so i guess i can't use that.
