I had the same problem, I made my own relay harness last winter. I tried multiple ways to make everything work like stock, the only solution I found was to trigger the hid's on with the high beams, it takes the factory DRL relay/controller out of the equation. It won't work unless you plug in a stock bulb as a dummy, i snapped off the high beam pin so the bulb wouldn't turn on.
It's like the dummy bulb acts as a resistor or something. It wouldn't work on low beams though. this should work for anyone using a single low beam retro.
info for building harness from hid planet.
__________________
Mopar Stage 2 w/toys, ED wuss IC, Boomba Engine Mounts, TWM STS, Mopar Stage 3 coilovers, Hotchkis Sways, DC FSB, Pwerks RSB, Volk Racing LE28N 17x7.5 wheels, Toyo T1R tires
Original join date: Sep 2004
|
