How to Install Non-Fouler Mod
Tools:
1. 7/8" wrench
2. Jack and stands
Installation:
Start off by jacking up the driver side of the vehicle. Put a jack stand under it for safety purposes. Now with your 7/8" wrench, remove the stock o2 sensor. Then thread in the Non-fouler and snug it down. Next unclip the o2 sensor from it's harness and thread it into the non-fouler. Snug them both down and re-clip the o2 sensor back into the harness. This should take all of 5-10 mins to install.
