Quote: Originally Posted by camlifter
put the set boost and set gain closer together,like 85-80, if you want it to spike (don't know why you would want a 50 trim to spike) set the gain lower, start going down 1% at a time from the 9% your at, untill you get the spike you want.
also check what you have the safety boost set at. and how many % you have it set to pull if you hit the over boost limit. best to turn that stuff off untill you get the rest set up how you want it.
Thanks for the post also. Yeah I dont know why a said spike. I just want it to be were when I floor it, it boost 20-21 and hold it untile redline. I will put the set boost and set gain closer together and lower the gain some and see how it performs. I just thought it was odd to go directly to 14psi (which is WGA) and then climb to 20psi.
