put the set boost and set gain closer together,like 85-80, if you want it to spike (don't know why you would want a 50 trim to spike) set the gain lower, start going down 1% at a time from the 9% your at, untill you get the spike you want.
also check what you have the safety boost set at. and how many % you have it set to pull if you hit the over boost limit. best to turn that stuff off untill you get the rest set up how you want it.
__________________
This post is completely ENVIRONMENTALLY GREEN. It was prepared using 100% recycled words and recovered hot air and other gases from the exhaust of the private jet Al Gore used to fly over to Norway and pick up his Nobel Prize. It has been further environmentally corrected and enhanced through the use of Intelligence Offset Coupons.
Last edited by camlifter : 10-30-2007 at 02:43 PM.
|
