Quote: Originally Posted by guhfluh
Psst... To answer your phone msg. Dave's in Arlington TX.
I'd recommend the "Det Can" headphone setup for tuning. The knock sensors have to be tuned themselves, and how are you going to do that? With "det can" headphones. So either way you have to listen for knock with your ear.
I told you how to check the scan guage. Start the car, run the car up to 3000 rpm and TAP the side of the block next to the knock sensor with a hammer. You should see knock on the scan guage.
K I will end up doing that to check the scan guage. There are some tuners over there in texas that are willing to let me use there dyno, but were in dallas....wasnt sure how far away that is from arlington.
