I'm posting this because I'm finally at a point at which I'm relatively happy with it. I keep forgetting there's a problem with the software that seems to cause it to not read the RPM right in the datalogs though - I need to add a .dll to my laptop to fix it.
In other words, although I normally see 20+ psi at 4000 rpms, the datalogs don't show it. (Either that, or I've got an exhaust manifold leak...)
Edit: Forgot to mention I'm using the STOCK solenoid to run my turbonetics external WG, top and bottom ports.
My .cal as of today:
RedSpeedFreak.V1.21.cal
A few datalogs from today:
Datalog 1
Datalog 2
Datalog 3
Datalog 4
Datalog 5
Datalog 6
Advice welcome...especially if you know how to set up the traction control.
