first off, he's got a fpr listed but no info on blocking the stock regulator. or a return line, and if your going to set the base pressure as low as 45 psi your going to need at least s2 injectors. with stock injectors at that low of a base the closed loop fuel trims will be way in the + zone.
no need to waste money on an intake, stock air box will work fine for all the mods listed.
a map clamp only works at one set voltage, fine for hiding max boost from the pcm, but worthless for tuning after you've upped the boost, you'll be way rich after the spike.
__________________
This post is completely ENVIRONMENTALLY GREEN. It was prepared using 100% recycled words and recovered hot air and other gases from the exhaust of the private jet Al Gore used to fly over to Norway and pick up his Nobel Prize. It has been further environmentally corrected and enhanced through the use of Intelligence Offset Coupons.
|
