Quote: Originally Posted by phrozen
Quote: Originally Posted by Philth
Quick question, would it be feasible to actually tap the red wire in the WOT harness for power to the TCS box? I want to hack the stock harness as little as possible...
Also, what's this "optional" connection for the MAP sensor do for us?
Yeah, you can power the TCS off of our wire. Just make it a three way splice when you hook up the ASD output to our wire.
The optional MAP connection doesn't do anything right now. When I get a free minute to breathe, I'll write a software upgrade that will add MAP as an additional condition to arm.
Right now the WOT Box will activate any time the TPS is above 80% and you go to shift. There is a chance that it could trigger when you don't want it to while launching with a two step. Adding a MAP input will keep it from triggering during this condition.
However, I think with the latest load this problem may not happen. Someone with a two-step needs to test it and let me know....
Well, get mine over to me quick and I will test it for ya.
Thanks phrozen
