Quote: Originally Posted by Philth
Quote: Originally Posted by phrozen
Quote: Originally Posted by Philth
Phrozen - Just to confirm.....
The WOT shift box needs to be installed closest to the ignition coil, with the New Design Elec. TCS box installed farthest away from the ignition coil?
BTW...I hope I get this by Saturday...it's my only free day
Take a look at our installation diagram:
http://npcomplete.pbwiki.com/WOT-Box...n-Instructions
You want the TCS box to get it's power from the RED side of the 16 AWG pair. The black side is going to get cut off during WOT shifts, which would be bad for the TCS controller.
Got ya.
Quick question, would it be feasible to actually tap the red wire in the WOT harness for power to the TCS box? I want to hack the stock harness as little as possible...
Also, what's this "optional" connection for the MAP sensor do for us?
no that is the asd feed into the wot box,we dont want any thing else on that wire.its noisy enough
