Quote: Originally Posted by phrozen
Quote: Originally Posted by Philth
Phrozen - Just to confirm.....
The WOT shift box needs to be installed closest to the ignition coil, with the New Design Elec. TCS box installed farthest away from the ignition coil?
BTW...I hope I get this by Saturday...it's my only free day
Take a look at our installation diagram:
http://npcomplete.pbwiki.com/WOT-Box...n-Instructions
You want the TCS box to get it's power from the RED side of the 16 AWG pair. The black side is going to get cut off during WOT shifts, which would be bad for the TCS controller.
Sorry I am already in bed getting ready to go to sleep for a nice 5am wake up for Squadron PT. OH BOY!!!!!!!!
so anyway, what wire does the TCS run off of? I will have to take a look tomorrow to refresh my memory but I just wanted to know in advance if it was already setup on the black wire so that I would have to switch it.
