Quote: Originally Posted by Dman_23
ok so i hooked everything up and when i turned the power on(i hooked up the power to a switch instead of a switch ign.) it just started spraying and wouldn't stop till i turned the power off.
in this picture, what is the red line right under the power line for the pump? Do you have that pluged in if your not using the vari cool? Also how do you hook up an LED to let you know when its spraying? One last question, im using a stock coldside pipe for now and i tapped the nozzle in right before it connects to the TB, this is after the air temp sensor, is this ok or was i supposed to tap it before the sensor for best results?
sorry for all the questions but thanks for your time to answer them.
It sounds like the the wiring on the boost switch is backwards. There are 3 wires on the boost switch, if you dont have them just on that picture it can do exactlywhat you are saying. I would tap before the sensor.
CM
