Quote: Originally Posted by 909Sxt
hey guys I just ordered the Hahn Race Craft fuel pump upgrade, so that makes my mods: agp hard pipe kit w/HKS bov, mapclamp, ngk 1 step colders and qw df fmic. Once my 20g kit comes in, where should I gap my plugs? there at .45 now, also how much boost can the stock wga hold?
put your plugs down to 0.035 til the 20g arrives.. you'll thank me later...
put em to 0.032 and lower depending on how the car runs when you install the 20g...
depending on your injector size, you should be worried about blowin your motor..
stock/stage1 injectors can support 15-16psi on the 20 only.....
p.s. the hahn fuel pump upgrade is a walbro 255.... hopefully you didnt pay too much for it
cheers
