Quote: Originally Posted by srtquatro
okay. in stalled my trunkmount today. took about 2hrs or so. i didnt have directions that came with the kit, so i was confused on a few things. first...when i filled up the tank...i noticed it started leaking all over my trunk....ther is a hole in the middle of the tak beside the pump with a 1inch of hose on it...kinda like a breather....it started leakin kinda bad from ther..so i plugged it to stop. wat should i do about it? next is how do i really know the pump is runnin? neway to check it without boosting? also i had to buy 15ft of vac line...was that soposed to be included with the kit?(if not its cool, just makin sure) other than these few quick questions, i have nothin but good things to say about the ease of instal with coolingmist.
That 1 inch tube should be connected to the fitting on the drinking side of the pump. if you are looking dead on to the pump, on the left is the 1 inch vacuum hose that drinks the fluid, it should be connected to the 90 degree fitting, its what drinks the water. Let me know if that makes sense.
