Quote: Originally Posted by dj4monie
The kit isn't here yet, but I had a few questions about setup...
If needed, I'll have to use the W/I as a way to enrich my fueling up top.
Can I set the controller up in 2D mode now or is it advisable to just make a basic connection and use it in 1D mode?
This should be interesting...
You can absolutely set it to run in 2D mode. All Vari-Cool controllers can do this. You will need a USB to serial converter and Window XP, NT or 2000 computer (Vista is not supported at this time). 2D mode is when you need more than 1 input to keep extra flow up top and none or very limted flow down low.
CM
