i have the 20g kit. dynoed at 340whp, 390trq, but that was with a bad boost leak. bov was hooked up wrong and opening under boost. spike 24 then fell to 16. problem fixed now going back to the dyno next week. boost is holding better, 24 falling to 22 by redline.
also, i have that chachachacha sound when it spools up. i didn,t know it was a problem until i seen someone mention that its the sound of surging(BAD). how do i stop this from happening? my wga is cranked down to 18psi and using mbc to ajust it to 24. oh, and im not using the wga that came with kit. my boost was irratic with it so took it off. moded my agp wga(15psi minimum) to fit. works great. any suggestions on my surge problem.
__________________
stage2,Hahn s20g kit, QTP 3" dp w/dump, 3" sri, ED "beast" fmic,agp/turbonetics hp's, whalbro255, agp rL kit, RC 750's, CM w/m injection, 180 therm., catch cans, msd wires/coil, ngk plugs, agp wga,Hallman mbc, "raptor" bov, mm inserts, weapon-r torque damper(stiffy), spec stage3clutch/flyweel, b/s chain cut, s-afc II, PLX wideband,T-XS knock light, autometer(boost30psi,water,volts)A.F.scanguage pro, NDE TSC box
406whp, 425wtq
|
