David, I finally got the kit to start spraying, well pouring, off of the red boost line. I noticed that the adjustment screw is very touchy. It wasn't sensative enough so I backed it out a few turns. It would then come on at 0 boost. Well, then I turned it back one turn, and this made it come on at 15psi. Long story short, I have found that while setting the psi, I would do it in quarter turns, because it could change drasticly. I would like to see some more pics of guys who have used the 15 ft of hose. Where are they mounting the tank. I have seen one, which has the how too! But that guy is going to end up losing is line to something in the road one day. I measured the extra hose that I needed and it was approx. 5ft. I can ownly ASSUME that some do not really care about whether their lines are well hidden. This is not me trying flame David anybody (It's got to where you have to say that or some people get offended!), I am on his side. I just really don't understand how I can make up 5ft of hose and it still be out of the way and well hidden. Thanks,
__________________
AGP S3 Delta 44, Walbro 255, S2 WO Toys, PTP CV,3" exhaust depot, PTP HS, Greddy TT, AGP dog bones & Trans mount, 18" Sports Max Racing rims, Mopar Performance Clutch, Mopar BOV, Mopar SS, Mopar CAI, Mopar oil pressure gauge, Mopar Volt Gauge, cooling mist W/I (trunk mount)using Cool fuel, BWoody CC, CBD B&C Pillars, CBD fog lights inserts, BFG 225/40/18, Magnaflow 3 in/out muffler, Eibach sportline springs, AEM UEGO, Darksyde ported intake & TB.
|
