I need to update this thread. These quotes are all in this thread. I stated that our system would shut off near instantly when the power is turned off and the system would spray near instantly once the power is turned back on. I was clear that would be no delay. Certain people on this forum (below) love to attack everything I have to say. I just want to post video for proof.
Quote: Originally Posted by coolingmist
if the valve is closed and there is water in the line and the valve does not come open, water cant seep out. Do the experiment I told you, think of your thumb as the checkvalve and the other side the hose that connects to the checkvalve.
Or you can just trust me.
Quote: Originally Posted by cali
CM you are 100% wrong wrong wrong!
CM,
How can you sell WI kits and spew mis-information?
Grifter, I encourage you to perform the expermient.
Here is the video. Make your own decisions. Also I would point out that this is how our current group of kits perform. Other kits on the market may or may not have a long delay and cause this problem. Ours does not:
Here is a video below. Here is the setup:
http://coolingmist.com/info.aspx?key=newvid
16 GPH nozzle
15 feet of hose from tank to sink
checkvalve at the pump
I am not able to take a video from a distance from the tank so I hooked up an LED to show you when it gets power and activates.
Pic of the checkvalve/tank.
Nozzle size
Here is the setup, sorry its not pretty I did not have much time today.
