Include

[distinctdev]

CAUTION: Use at your own risk. You WILL HAVE TO MAKE MODIFICATIONS TO THIS MAP, MAPS ARE NEVER PLUG AND PLAY BUT THIS SHOULD BE A GOOD STARTING POINT. I TAKE NO RESPOSIBILITY FOR YOU, YOU CAR, YOUR MOTOR or any other problems you may encounter using this file.

Hey guys, this is a gt3076r map which was originally started by nemo at ragetek and was modified last night by me. I realized I had o2 feedback on when he was doing my drivability so I turned it off last night and then got it almost 14.5-14.9 everywhere then turned it back on. I also redid the fuel by using hybrid boost comp. This map uses an aem selenoid for boost controll @ around 20-21psi. The a/f was tuned to 11.9 and gets slightly richer after 6k. I then turned on o2 feedback for 11.9 which should keep it there as weather changes. If you use this map make sure your wideband is hooked up and working correctly with your ems, if not turn off o2 feedback. Since this map is tuned for 11.9 be careful because even if you have the same mods as me the a/f can vary.

STOCK MOTOR AND HEAD
Kinetic Motorsports GT3076R
AROX Ported Intake Manifold
Lorenzo Throttle Body
750'ccs
fuel pump
Return line boost only source i think 38psi
3" exhaust
darrel cox oil modifier
mopar 3 bar map sensor

I think thats the most important stuff

Knock control is on, and I suggest removing a few degress of timing in boost before testing any map you download. If your car needed timing adjustments when you installed the ems, you will need to make these again, also dont forget to calibrate your TPS!

CAUTION: Use at your own risk. You WILL HAVE TO MAKE MODIFICATIONS TO THIS MAP, MAPS ARE NEVER PLUG AND PLAY BUT THIS SHOULD BE A GOOD STARTING POINT. I TAKE NO RESPOSIBILITY FOR YOU, YOU CAR, YOUR MOTOR or any other problems you may encounter using this file.