EBC's works best
mbc's fall quick for some reason on these turbo. With two types I had I would set it and it would fall back 4 psi were I set it. Like it would spike to 20 real quick and fall to 16 then hold.
Or you can just run striaght off the wga, that works real well. Or set the wga to a certain psi (the psi you want it at) and barley tighten the mbc(the loosest it would go with out falling out). Doing this your setting a bleed in route, kind of making a small surge to speed up the spool up. Then you make small adjustments until you get it were you want it (spool up/spike) but if you get surge turn it back. Surge is that chachachacha noise you hear when spooling up.
__________________
Click On Sig For Custom Tunes\Installs
Garage
|
