Quote: Originally Posted by Srt-power
I got a question for you. Where would be the best place to place the nozzle? I have the agp hardpipes but the AIT sensor is placed real low on the pipe, so I don't have much room to put it below that. Would putting the nozzle in the hot side pipe work just as good or would it work better closer to the sensor? Thanks for you time.
it will work, but personally I prefer if possible to do it after the IC. I believe to let the IC do the job first. Keep in mind that many cars dont even have an Intercooler that use our kits, so it will certainly work if you place it prior to the IC.
D.
