Quote: Originally Posted by tavenger5
What do you recommend for a typical 50 trim (in my case t3/t4 DBB) running upgraded fuel and other supporting goodies? I want to run at least 25psi with no problems.
What are the advantages of direct port?
I recommend our controller kit, varicool stage II. I has the ability to let you create custom maps if necessary, but also varies the flow based on your input of boost (or can run in 2d mode boost, AIT or EGT, etc).
With that kind of power and mods you want something that can give you a varied output from min to max.
The direct port is sweet and if you are in serious need of cooling and want to make sure you get equal distribution in each port its the way to go. You can tap the nozzles from the outside of the manifold so its easy to install as well.
Let me know if you have more questions.
