Quote: Originally Posted by AWH
I have a 2003 SRT4 and recently replaced my clutch with a SPEC SD-842 Stage II clutch. I am experiencing a strange grinding/vibration when I push the clutch all the way to the floor. It sounds like a mini-jackhammer, or a fan when something is stuck int it.
I can feel the vibration coming from the pedal. There is no grinding or vibration coming from the gearbox, and the gears shift smoothly.
My mechanic, who installed it, was unable to detect the problem and questioned as to whether the new unit is a direct replacement for the stock clutch. He did notice that the fingers on the pressure plate were pitched slightly higher than the stock clutch. I contacted the outfit from which I purchased the clutch, JSC Speed, and they assured me it was correct for my car.
The car seems to shift okay and I can avoid this grinding as long as I dont go all the way to the floor with the clutch pedal. The car is stock otherewise. Any insight on this would be greatly appreciated.
Curious to no if you resolved this problem and what it was i am getting the same symptoms cant stand it anymore...
would appreciate the help
__________________
FONT="Georgia"]MM Steering Wheel, Dual Pod, Tints, Mopar tail lights, Mopar STS, Eibach Springs, G-Reddy CC, Prothane MM, Fan Mod, AGP Plug and Wire kit, AEM SRI, Custom 3" DP/Exhaust, AEM Wideband, AGP Fuel Kit, Hard Pipes, G-reddy bov, MPx fmic, 30psi Gauge, 180 Stat, Powerslot Rotors, Techna Brake Lines, DC Strut Bars, AEM Tru Boost, ACT Street Clutch, Prothane SB Kit, BB50TRIM, Konig Prophets 18", Toyo PX4 .
|
