Quote: Originally Posted by Ronald647
Hey 'o3, that sounds nice with the resonators removed, did you just piece in where they were cut out? If I do it I'll have a shop do it, I will also be hooking a o2 and a downpipe soon ,but for now this MAY WORK!
Thanks for the clip.
Ronn
Yeah, the front of them clamp on, so just gotta undo the clamp, then the second one is right before a bend, so you have to cut it off flush with the end of it to get the replacement pipe on before the bend. It takes a 41" piece of pipe to replace them. Its a cheap way of getting a good sounding exhaust. 
__________________
2003 SRT-4, MPX/Maxx/Mopar exhaust, S1, AGP WGA, BFMIC, Walbro, Neo and alot more.
92 Cherokee, fullsize axles, locked front/rear, 8" lift, 35" tires, beadlocks, hydro assist, and alot more.
97 Wrangler, 2.5" lift, 32" tires, polish/black aluminum wheels, hard & soft tops.
08 Can-Am Outlander 650XT, V-Twin motor, 3000lbs winch.
|
