Quote: Originally Posted by j2talc
Well here are my results after the dyno yesterday.
Basically its stage2 computer with stage2 injectors, ED fmic, dp, and exhaust. I have it set to run 17 on the street but on the dyno it was about 14-15psi. Between the low boost and the small injectors I think thats why I had such low numbers but hopefully I can get some bigger injectors soon. Also, I had to draw in the torque curve because it was soo light that you couldn't see it. Heres the pic.
I hated my 50 trim at anything below 17psi. Just felt slower than stock. Did you turn the boost down on the dyno? or did something happen to make you run 2lbs lower?
