Quote: Originally Posted by ptperformance
Quote: Originally Posted by srtowner
I just spliced mine into the WB ground like most all the other wires. On another subject one thing I have noticed. With mine if I want to datalog or tune I have to start and connect with the car turned off but the key in the on position. I don't know if it's a problem with my grounds, or the USB adapter, my laptop,or the FTM. Or maybe it's just how it is supposed to be done.
Had this issues on a few of the prototypes. Make sure that you hooked up to the right power wire on the PCM.
Yeah I double checked all my connections before putting everything back together. I even had the pin otu digrams from the service manual. I think it may be an issue with my usb to serial adapter. Some work batter than others. From reading datlogging forums aparently some will not work at all. I will try a differant adapter.
