Stage 4 6 puck problem...
Hey guys..I just recently installed my Clutchmaster Stage 4 clutch. After the install I noticed that the car would go into every gear fine with the car turned off. However, once the car was running it was pretty tough to get the car into 1st gear or reverse when sitting still...however, 2nd, 3rd, 4th and 5th were fine to get into once the car was actually moving. So today, I replaced both the Master and Slave cylinders and adjusted the pedal all the way out and i still have the same exact problem..they did nothing for me. If anyone knows what my problem is I am open to suggestions. It just seems that no matter what I do the clutch is not disengauging as it should..and it feels almost as stock...doesn't really seem to grab hard all the time, but then again im in the process of breaking it in with maybe 100 miles tops on it. Also, I have no chatter at idle like most people end up with...all in all I dont think it's performing as it should and something is wrong..
Dustin
__________________
R.I.P Jeff (Pilsburry)
R.I.P Steven "Nightshade" Lorenz & Maximillian 4-4-06, you will be missed.
Boost = The Replacement for Displacement
Frederick's first 50 trim setup..417whp/434ft lbs...SOLD
2005 GT35R Evolution 8..current 
2001 Honda s2000..SOLD
1992 NSX Blue EG...Fully built All Motor  ..SOLD |
