MODS:
No intake
Kinetic Motorsport DBB 50 trim with WG dump
HP racing 3" turboback exhaust w/ no cat
Stage 2 PCM (going out)
Stage 2 sensors (going out)
RC 750cc injectors
'03 fuel rail w/ schrader valve
Lujan Motorsports Fuel return
Walbro 255 Fuel Pump
Greddy Emanage
Greddy Profec E01 EBC
Mopar Performance plug wires
NGK 4306 plugs gapped at .32
Quickwhips 4" FMIC
ED hardpipes w/ greddy type-s BOV
plus other non performance mods (STS, motormounts, etc..)
Boost set at 22psi, fuel pressure set at 43psi base
Stage 2 PCM was pulling a lot of timing. I'll be going back to stage 0 and i should see a 20-30whp gain.
I have a race ported TB, Spacer and Intake Mani from fullyBuilt on the way as well.
YES, that's my stock clutch slipping on the dyno
Pic of the motor w/o inj cover.
