Quote: Originally Posted by Larrywoz
I have been looking for slicks and the wheels to go with for my 2005 ACR.
I am worried about the fitment with the struts hitting them. None of my friends have ACRs so I have not been able to get any good info.
Those bogarts that the above link leads to looks good and If I went with such a good looking wheel I might as well get the set(skinnys) for the back.
Can anyone help me out with some recomendations for a wheel/tire set set up for drag racing slicks??
I have been searching threads for days now talking to everyone I could get to listen about this issue. I have finally come up with what I want and what most people want to know. This is however totaly unrelated to this particular thread.
After speaking with John at M&H slicks a supporting vendor for the board I have come up with the perfect size for my application. As far as the slick size goes I am going with a 24.5x8.5x15. I will be putting these on 15x7 Kosei Silver rims.
If you go with a 26 inch tall rim you will have to go with a 6 inch wide slick to make it clear the stock perch. You can go to an 8 inch slick if you cut the perch to make for the clearance or you will have to switch to coilovers.
By the way John at M&H was very helpfull and I would recomend anyone with questions or looking to buy a slick call him. Or contact them. There is a link in supporting vendors and here is the email addy
mhash@att.net or you can call him at 1-661-706-1576 .
Hayabusa
