Quote: Originally Posted by DaZone
1st that i read about this.
damn good job. I think this is something i need. Im not good with wires though.
comes with a how to install?
There are full, illustrated instructions. The installation is very similar to the Mopar toys instructions. Take a look through those to see if you are comfortable with the installation.
If not, just find someone who has done a Toys install before. They will know basically what to do. The only hard part is the PCM connector drilling and pin insertion. I got stuck there when I installed mine. But, it is the kind of thing that once you do once, you'll know right away how to do it.
It's even easier than the mopar toys since you don't have to do the IC sprayers and there are only connections on one side of the harness. Just splice 3 wires and insert 3 PCM pins and you're done.
