Quote: Originally Posted by yellowRS
How did you come up with that?? I made 493whp with a single walbro on a 35r @ 29psi with 750's. My FP was about 45 with the line off. After adding a second walbro I was able to run 37psi on 750's.
This is where I got the injector size.
http://www.iroczone.com/calcs/injectorsize.htm
I'm not sure on how it takes the boost made into account. My concern is that I get the proper size injectors for the application I am using.
How did you decide on 750's?
Sticky this would be great, I know the stage 3 guys have a sticky....
