Go Back   SRT Forums - SRT4, SRT6, SRT8, SRT10 & Dodge Forum
Register Home Forum Photo Gallery Active Topics (D) Chat VBay [0] Mark Forums Read

       
SRTForums.com is the premier Dodge Neon SRT-4 on the internet. Registered Users do not see the above ads. Please Register - It's Free!


View Single Post
Old 09-29-2005, 03:46 PM   #10 (permalink)
TJ1376
SRTforums Member
 
Join Date: Feb 2005
Member Number: 24364
Location: Kansas City
Trader Rating: (8)
Posts: 3,273
Default

Quote: Originally Posted by TJ1376
Quick question. On this thread, you show hacking into a bundle of wires for the TPS wire. Is that wire color coded the same as on the PCM?

That makes no sense... Is the TPS wire you want us to hack into on the sticky for this install the same Orange/Dark blue wire as on the PCM harness?

Does that make sense?

How are you guys running the wire thru the firewall?

TJ

Just for people with the same questions...
First, yes, the TPS wire you need to hack into on the throttle body is the same color as the pcm wire at the pcm connection. I just wanted to double check for I rigged up the Zeix. Thanks for the SRT Service Manual Rob... Came in REAL handy last night.

Here is how I ran the wire for the 02 sensor. I first removed the center console. Super easy, 4 bolts in the tray, 2 bolts in the cup holders and then removed the shifter boot from the center console by unclipping the 4 clips from underneath the boot. This allowed me to remove the center console out of the car. Now, follow the shifter cables toward the firewall. You will see a rubber piece on the floor board. Take the 3 screws on the metal plate surrounding this rubber piece on the cabin side out, then get under the car and remove the 4th screw, which is on backwards. (You must have the dp removed from the car to do this!) Pull that metal plate off and you will have easy access to the rubber boot. I took a razor blade from inside the car and made a cut like a cross... One vert cut and one horizontal cut intersecting in the middle. I then got under the car with the Cat5 connector for the wideband sensor (Thats the connector that plugs into the Zeix) and fed it thru the circular hole in the metal plate (the one you just took off) and then thru the rubber boot. Next step is to reinstall the metal plate. After that was done, I routed the cable behind the heat shield and off to the side of the dp tunnel, where it awaited for me to install the dp. Don't forget to put the 02 sensor IN the dp before you hook that bad boy up. Just an FYI.

TJ
TJ1376 is offline   Reply With Quote
 
Google Links

» Wheel & Tire Center

Sponsors

Sponsors

Powered by vBadvanced CMPS v3.0 RC2

All times are GMT -6. The time now is 12:29 PM.

(C) SRTforums.com
  • AutoForums.com
  • Truck
  • European
  • Import
  • Domestic
  • Manufacturer

AutoForums.com is the premier network of enthusiast-owned enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share experiences and opinions as a community.

Visit AutoForums.com today.

For advertising information, please visit our AutoForums.com website and Contact Us, or send an email message to sales@autoforums.com.

Page generated in 0.10420 seconds with 10 queries