ALL THESE PARTS CAN BE FOUND AT
www.summitracing.com
www.jegs.com
for around 80-85 bucks maybe less
dont forget my free instructions at the bottom and ME online i can help you with anything if i have time just ask
Recently people have had some fuel problems. I had a problem getting enough fuel up top (higher RPMS) weather it was my pump or how I had done things I am not sure. What I do know is that the fix that was pointed out to me has helped my car in so many ways.
This removes the 1/8 feed bottle neck coming off the pump and using the stock filter, FPR when going to a return line
Drivability is better, tuning became much easier. And no more fuel problems
Below is a small picture of what was done
I am also going to try and include a parts list.
If you have any questions on what was done please feel free to ask
This is not 100% my original idea some of this info was taken from PSI FI, and a spool boy feed setup from neons.org
All I did was question the current setup and how I thought that it had to be a problem and needed help coming up with a solution
All prices are from summit
Parts list
1 -6 bulk head fitting
AER-FBM2072 $7.88
1 bulkhead fitting nut pack of 2
AER-FBM2100 $5.25
1 Stat-O-Seal, 9/ 16 in. I.D., Fit -6 AN, Aluminum with O-Ring, Pair
EAR-178009ERL $5.99
2 pushlock -6an fitting
AER-FBM1512 $4.95
3 feet of stainless braided hose -6
AER-FCA0603 $15.88
1 straight ends for the braided hose
AER-FBM1012 $5.95
1 90 ends for
AER-FBM4032 $16.88
Earls 85 micron 75psi Stainless Steel mesh element
EAR-230206ERL $31.39
2 packs of 4 5/16 fuel line clamps
2 feet of 5/16 fuel injection line
you will need a dremel tool
a drill
zip tie's
sanding drums for the dremel
and a little imagination
